Selection skills of hot melt adhesive film for non-woven fabrics

November 25, 2022

Hot Melt Adhesive Film for non-woven fabrics, as the name suggests, refers to the type of hot melt adhesive that is professionally used for composite bonding of non-woven materials. For those who are not familiar with hot melt adhesives and those who have not yet used hot melt adhesives, how to select the correct type is a very difficult problem. Hot melt Adhesive Film manufacturers in Jiangmen will share some tips on the selection of hot melt adhesive films for non-woven fabrics, hoping to help friends who have needs in this regard.

Hot Melt Adhesive Film For Car Interior Decorate

Under the category of China Hot Melt Adhesive Film, its product types are very rich, among which hot-melt adhesive film and hot-melt adhesive mesh film are widely used in the compounding of materials. The composite bonding of non-woven materials uses hot-melt adhesive mesh film-based thermal adhesives. The specific selection skills can be summarized into the following aspects

Hot Melt Adhesive Film For Fabric Laminnation Selection

(1)Non-woven and non-woven composite selection
The composite bonding of non-woven fabrics and non-woven fabrics is difficult to select. In theory, hot-melt mesh films can be used as composite adhesives. However, if this type of composite needs to consider the washing resistance, it can be selected from three types of hot melt adhesive mesh films: PA, PES, and TPU.
(2)Non-woven and leather composite selection
The composite bonding of non-woven fabrics and leather materials is generally recommended to use the hot melt adhesive mesh film of the pa material type. As for which melting point and gram weight to choose, it depends on the specific composite process.
(3)Composite selection of non-woven fabrics and metal materials
There are not many options for composite bonding of non-woven fabrics and metal materials. Considering the adhesion of hot melt adhesive mesh to metal materials, it is recommended to use pes material type hot melt adhesive mesh.
(4)Composite selection of non-woven fabrics and sponge materials

The composite selection of woven fabric and sponge material will be affected by the composite equipment, but it is basically the choice between the hot melt adhesive mesh of the two materials of PA and EVA. If the composite equipment used is better and the temperature can meet the requirements of the PA hot melt adhesive mesh film, the PA hot melt adhesive mesh film is selected as the composite adhesive; if the composite equipment is relatively old and it is difficult to reach the melting point of PA, then only Optionally, EVA hotmelt mesh can be used as the adhesive.

Hot Melt Adhesive Film Manufacture

Author:

Ms. vivian

E-mail:

jojo@bamalosa.com

Phone/WhatsApp:

+8619128298797